AC International EZ-TP - Manual (Page 15)

Playing the EZ-TP
EZ-TP Owner’s Manual 15
● Microphone Volume Adjustment
This step matches the sensitivity of the instrument’s
microphone to your voice.
Rotate the control clockwise to make it easier for quiet
voices to produce sound. If you rotate the control
counter-clockwise a louder voice will be required to pro-
duce sound.
You can turn the knob counter-clockwise when you want to reduce sensitivity so
that ambient sounds and noise don’t cause the instrument to sound.
● Precise Adjustment Procedure
This procedure can be used to calibrate the MIC VOL control for optimum sensitivity.
1
Press the button so that the lower indicator lights.
2
Press the [TEMPO] button – the button will light.
3
Press and hold the [TEMPO] button while pressing the [+] but-
ton until “L” appears on the display.
4
Set the MIC VOL control to minimum (rotate fully counter-
clockwise).
5
Place the EZ-TP mouthpiece against your lips and sing the
loudest note you will play when actually playing the EZ-TP.
While singing a note at the loudest expected volume, rotate
the MIC VOL control clockwise just until the valve 3 indicator
lights, then stop. That will be the optimum sensitivity setting.
6
Once the adjustment has been made, perform steps 1 ~ 3 of the
“Changing the Guide Lamp Mode” procedure described on
page 23. Select “Aut” in step 3 so that the guide lamps indicate
which valves you should play while playing along with a song.
Adjust the Microphone
MIC VOL
L
MIC VOL
13