Darex XT-3000A - Manual (Page 5)

3
Safety Instructions
FOR YOUR OWN SAFETY, READ INSTRUCTION
MANUAL BEFORE OPERATING MACHINE!
Caution:
• WE DO NOT RECOMMEND OPERATING
MACHINE WITHOUT A VACUUM SYSTEM
RUNNING
• GRINDING DUST INHALED/INGESTED
CAN BE HARMFUL TO YOUR HEALTH.
• GRINDING PARTIALS WILL CAUSE
DAMAGE TO THE INTERNAL
COMPONENTS
Caution:
WHEN USING ELECTRIC TOOLS, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO PREVENT THE RISK OF FIRE, ELECTRIC
SHOCK AND PERSONAL INJURY, INCLUDING
THE FOLLOWING:
• WHEN MAINTENANCE OR MACHINE
ADJUSTMENTS ARE PERFORMED ON
SHARPENER ALWAYS: Push the emergency
stop button, unplug unit from power supply
and use a “LOCK OUT” “TAG OUT” procedure.
• FOLLOW INSTRUCTIONS ENTITLED
“DAREX XT-3000 Maintenance" in this
Instruction Manual.
• NEVER TOUCH INTERNAL PARTS OF THE
SHARPENER WHEN THE SHARPENER IS
ON The rotating grinding wheel can cause
injury.
• USE CAUTION WHEN REPLACING THE
GRINDING WHEEL Follow instructions
entitled “How to change a wheel”, on page 18
of this I nstruction Manual.
• KEEP GUARDS IN PLACE and in working
order. See Decal at left.
• REMOVE WRENCHES Always check to see
that any tools have been removed from
sharpener before turning it on.
• KEEP WORK AREA CLEAN Cluttered areas
and benches invite accidents.
• DON'T USE IN DANGEROUS
ENVIRONMENT Do not use power tools in
damp or wet locations, or expose them to rain.
Do not use tools in the presence of flammable
liquids or gases.
• KEEP WORK AREA WELL LIT
• STORE EQUIPMENT in a safe place when not
in use.
• DON'T FORCE TOOL It will do the job better
and safer at the rate for which it was designed.
• USE THE RIGHT TOOL Don’t force tool or
attachment to do a job it was not designed for.
• AVOID ACCIDENTAL STARTING Make sure
switch is in the “OFF" position before plugging
it in.
• USE RECOMMENDED ACCESSORIES
Consult the owner's manual for recommended
accessories. The use of improper accessories
may cause hazards. See Decal at left.
• CHECK FOR DAMAGED PARTS Before
further use of the tool, a guard or other part
that is damaged should be carefully checked to
assure that it will operate properly and perform
its intended function. Check for alignment of
moving parts, binding of moving parts,
breakage of parts, mounting and any other
conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced.
• NEVER LEAVE TOOL RUNNING
UNATTENDED Turn power off.
• USE PROPER EXTENSION CORD Make sure
extension cord is in good condition. When using
an extension cord be sure to use one heavy
enough to carry the current the Drill Sharpener
will draw. An undersize cord will cause a drop in
line voltage, resulting in a loss of power and/or
overheating.
• DO NOT USE DAMAGED OR UNSHAPED
WHEELS Use grinding wheels suitable for speed
of grinder.
• THE CONTINUOUS A-WEIGHTED sound
pressure level at the operator’s ear is not over
60dB (A).
• RISK OF INJURY DUE TO ACCIDENTAL
STARTING. Do not use in an area where
children may be present.
• THE WEIGHTED ROOT MEAN SQUARE
ACCELERATION VALUE to which the arms are
subjected to does not exceed 2.5 m/s2.
Safety Instructions
230v~,50Hz,6A
230v~,50Hz,8A
• WARNING: This product contains a chemical
known to the State of California to cause cancer.
Some dust created by power sanding and grinding
as well as contents from the machine may contain
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
• TO MINIMIZE THE RISK OF INJURY, ALWAYS
USE PROPER EYE AND REPIRATORY PROTECTION:
Everyday eyeglasses only have impact resistance lenses
and they are NOT safety glasses. (See Decal at left.)
Use appropriate respiratory face or dust mask.