Automated sharpening attachment – Darex XT-3000A User Manual
Page 71
69
Connecting Vacuum:
The accessory receptacle on the back of the
Controller/Display is located in the
top position on the receptacle. This
will allow you to connect a dust
extraction system to be used dur-
ing sharpening.
*We highly recommend the
use of a dust extraction system
when the auto sharpening system is in
use. DAREX offers a vacuum system com-
patible with your XT3000.
Call DAREX for pricing.
•
SA12075EA - 115V Vacuum
•
SA12072EA - 230V Vacuum
Grit Tray/Vacuum Port Connec-
tion:
Grit tray
At the back of the machine, located underneath
the grinding motor is
the grit tray. Drill
grindings will
accumulate inside the
grit tray. The grit tray
has a magnetic liner
to attract and hold
these dust particles.
Do not let the tray
become more than
1/3 full.
To remove tray, unscrew brass thumb screw.
Remove tray and dump contents. Wipe excess
dust from the tray
with a rag.
Vacuum Port Connector
(Optional)
The grit tray has a knock out plug that can be
removed by hand
and replaced with
the vacuum tube
(SA16030TA).
Use this port to connect a vacuum hose to
the XT3000. This method of extracting dust
particles from
the machine
will keep it
cleaner and is
recommended.
Make sure the grit tray is in place and secure
before connecting the
vacuum hose.
Automated Sharpening Attachment