Direct Lift Pro9F - Manual (Page 7)

Pro9F 9000 lbs. Floor Plate Lift IN50019 Rev. C 03/30/2009 7
TOOLS & EQUIPMENT REQUIRED FOR INSTALL
The installation of this lift is relatively simple and can be accomplished by two men in a
few hours. The following tools and equipment are needed:
• Hoist or Forklift (optional)
• Two 10’ to 12’ step ladders
• ISO 32 Light Hydraulic Oil (approx. 12 quarts)
• Tape Measure
• Rotary Hammer Drill with 3/4" and 3/8" Drill Bit (Core Drill Rebar Cutter recommended)
• 4’ Level
• Metric Sockets and Open Wrench set
• Vise grips
• 8mm Socket Head Wrench
• Torque wrench with 1-1/8" socket for anchors
• Teflon Tape