Fairbanks AN Series Fairbanks Access Solutions - Manual (Page 109)

Section 3: Access Terminal Screens Defined
01/13 109 51299 Rev. 1
3.4.3. I/O Diagnostics, Continued
Set the Output - If this is selected, the output will be turned on or off and will not be
switched back. The delay setting is ignored.
•
Advanced Mode – Delay: Number of seconds to delay the switching back of
the output state.
3.4.4. Keypad Control
Keypad Buttons: The buttons on the page are laid out in the same fashion as the
keypad. Just click on one of them to cause the key on the terminal to be pressed.
This feature can be turned on/off on a per user basis. See User Setup.
Screen: The screen will refresh about every second. Occasionally only a partial
image or no image is retrieved at all. This is expected, it prevents issues at the
terminal.