Fairbanks AN Series Fairbanks Access Solutions - Manual (Page 55)

Section 3: Access Terminal Screens Defined
01/13 55 51299 Rev. 1
5
6
3.2.11. Traffic Control Setup, Continued
SCREEN PORTION 5 Drive By and Drive Off Alerts
These alerts occur when a transaction is not
started (Drive By) or started and not
completed (Drive Off). Each alert has the
same configuration options.
Output: When the alert occurs an output can
be turned on for the specified number of
seconds.
Alarm: The system alarm can be sounded
for a few seconds.
Attendant: If an intercom is connected with
a call option, the attendant can be alerted
through the intercom.
Email: An email will be sent to anyone
subscribed for this email.
SCREEN PORTION 6 Traffic Control Alerts
Traffic control alerts are general inputs to the terminal that will prevent a transaction
from starting and optionally from completing once started. They should be used when
the Loading setting is set to Before Transaction Starts. Up to 4 alerts can be
configured.