Fairbanks Aegis Coil Scales - Manual (Page 15)

Section 3: Scale Installation
04/10 15 51205 Rev. 2
3.2.3. Preparing for the Installation
The following tools, equipment and materials are suggested to be on hand
before the installation begins.
Product Setting Plans (Drawing)
Measuring, Testing & Checking Equipment
• Machinist’s Levels ( Starrett #134 & 132-6 )
• Stringline and chalkline
• Steel tape measure.
• Multimeter
Assembly Tools
• Hand tools
• Proper equipment to lift and position all parts, including a 2 ton weighbridge
•
20 ft. lifting chains or cables with hooks
• Pry Bars
• Torque Wrenches
• Hammer Drill
• 13/16” or 7/8” drill bit, 24” long
Materials
• Quality vehicle wheel bearing grease
• Anti-seize
─ Found at local Automotive Parts & Supply retailer.