Fairbanks Aegis Coil Scales - Manual (Page 22)

04/10 22 51205 Rev. 2
Section 4: Electrical Installation
4.1. INTRODUCTION
The Aegis Coil Scale is used with either analog instruments or with Intalogix™
systems.
• The Aegis Coil Scale comes standard with one (1) Analog Summing Junction
Box.
• Intalogix ™
Systems use Smart Sectional Controllers (SSC) and Pit Power
Supplies (PPS) for load cell excitation and signal processing.
When using Intalogix
™
Technology, order the following components
separately.
─ Two (2) SSCs and one (1) PPS for the entire platform.
─ The SSC boxes have four (4) terminals.
 Two (2) SSC Terminals are for Load Cells.
 Two (2) SSC Terminals are for interfacing to other SSC boxes, or for terminating
to a PPS.
 All Cell/Section/Scale adjustments are made using the Intalogix ™ System
Instrument.