Fairbanks FB1100 Series Yellow Jacket FS Package (30047, 30048) - Manual (Page 25)

Section 3: Programming
08/13 25 51219 -- Rev. 6
3.7. Exit Menu
When programming is complete and changes have been saved, exit the
program by pressing . Place the JP3 jumper across the two header
pins. Press to return to weighing .
! – IMPORTANT -- !
Remember to re-install JP3 to prevent accidental access to the
configuration/calibration areas. Legal for Trade applications require this jumper
to be in place. . If the JP3 jumper is not in place, it will not print
.