Fairbanks H90-5200-A Digital Instrument User Manual
Page 28
standard CTS operation or printer with busy, active low).
Serial Output Operation and Programming:
Clear to Send (CTS) Selection
Port 1 Only
CTS Value
50-3710
1
50-3715
1
50-3920 (Oki 182)
0
50-3921 (Oki 184T)
1
50-3925/SP2000/SP2200
0
PTR-3950/610
0
50-3960/295/590
0
Computer with CTS Handshake
1
Remote Display
0
20mA Current Loop
0
With ACC 146 Installed
Port 1
&
Port 2
CTS Value
50-3715
50-3921
1
50-3715
PTR-3950
1
50-3715
50-3960
1
SP-2000
1
50-3960
50-3715
0
50-3960
50-3921
0
50-3960
PTR-3950
0
50-3921
50-3715
1
50-3921
50-3960
1
50-3921
PTR-3950
1
PTR-3950
50-3715
0
PTR-3950
50-3921
0
PTR-3950
50-3960
0
Switch settings on ACC-146: 1, 3, 5, and 8 ON.
h.
The instrument will now return to the normal weigh mode.
2. Programming the Serial IO Format
There are 3 channels available
Channel 1 - Standard Serial Port
Channel 2 - RS232 / 20mA CL
Channel 3 - RS422/485 Output
a. Press FUNC, 3 to enter IO calibration mode. The display will show ‘CAL IO”.
Press the number of the IO channel you wish to format.
50515
28
Issue #2 4/04