Accessories, continued, Battery surfaces get very hot during recharging – Fairbanks 2800 Series Intrinsically Safe Instrument User Manual
Page 11

Section 1: General Information
01/12
11
50647 Rev. 9
1.3. ACCESSORIES, CONTINUED
1.3.5. Accessory 2845 Battery Charger 110-120 VAC (
31354
)
(REPLACES ACCESSORY 2840 –
21199
)
The Safe Area Smart Recharger uses the Battery Accessory 2830 only.
The 2845 Battery Charger is plugged into a standard outlet.
This accessory is intended for non-hazardous, safe areas only.
Follow these guidelines when charging Battery Accessory 2830.
A charged battery can be left on the charger with no resulting damage to
either the charger or battery pack.
When a discharged battery is first connected to a charger, the status L.E.D. on
the charger will be a constant yellow as it charges.
Once the battery is fully charged, the LED remains a constant green.
1.3.6. ACCESSORY 2846 BATTERY CHARGER 230VAC (
31466
)
FOR ACCESSORY 2830
Equipped
with
a
European Style 230 VAC plug
.
Used with the Battery Accessory 2830 only.
Intended
for
non-hazardous, safe areas
only.
Follow these guidelines when charging
Battery Accessory 2830.
A charged battery can be left on the charger with no resulting damage
to either the charger or battery pack.
When a discharged battery is first connected to a charger, the status
L.E.D. on the charger will be a constant yellow as it charges.
Once the battery is fully charged, the LED remains a constant green.
C A U T I O N
Battery surfaces get very
HOT
during recharging.