General Tools and Instruments DCS1100 - Manual (Page 6)

·
»
³
SIDE
VIEW
FRONT
VIEW
³ To probe socket on
DCS1100 handle
· View indicator lights
» View switch
Figure 2 shows the key components
of the P1618FS-49 probe.
2. The P1618FS-49’s
controls, indicators and
other physical features
SETUP INSTRUCTIONS
INSTALL 4 BATTERIES
To open the battery compartment (on
the back of the handle), lift up the semi-
circular metal ring on the screw in the
recess at the bottom of the plastic
compartment cover. Using the ring as a
crank, turn the screw counterclockwise until the cover loosens. Pulling on the
ring, pop the battery compartment open to expose the batteries.
Install four new “AA” batteries, using the
+ and – marks inside the battery
compartment as a guide. Close the
battery compartment cover and secure
it by using the ring to turn the screw
clockwise. Finally, push the ring over so
it is flush with the top of the screw in the recess.
6