General Tools and Instruments DT8803 - Manual (Page 2)

The 8801 and 8803 are 3 1/2 digit, hand
-held thermometer designed to use K-
type thermocouple as temperature
sensor.
8801 For 1 K-type Thermocouple input
8803 For 2 K-type Thermocouple input
To avoid electrical shock, disconnect
the thermocouple connectors from the
thermometer before removing the
battery cover and do not use this
meter on voltage at the measurement
surface beyond 24V AC or 60V DC.
To avoid damage or burns, do not
apply this meter in microwave ovens.
To ensure lead quality, avoid repeating
sharp bends in the leads as it can
damage the thermocouple leads,
especially near the connector.
SAFETY
INTRODUCTION
o o C F T1-T2 + -
REC MAX HOLD MIN REL
ON
ON
HOLD
HOLD
C/ F
1