General Tools and Instruments HT50 v.1 - Manual (Page 16)

have entered during Setup. To remove any parameter or
horizontal and vertical grid lines from the overall plot,
uncheck its box at right.
Fig. 4. A typical initial plot of an imported data log
There are several features shown in Fig. 4 worth noting:
• To mark the position of every recorded data point on the
curve, check the “Mark Points” box at the top of the
sidebar at right.
• To get a higher-resolution view of the data recorded
during a specific period of time, scale up and down the
curves by dragging the slider at the bottom of the
window left and right.
• Hovering the cursor over a particular point of the curve
displays all data related to this point—including the
maximum, minimum and average values of the entire
curve—in a shaded box at upper left.
• The dates and times shown on the x-axis scale and in
the upper left corner are in sync with your computer’s
clock.
16