General Tools and Instruments GTi10-20-30-50 - Manual (Page 42)

42
Shooting
Removing Analysis Tools
this
This section explains how to remove analysis tools that you have
activated.
1
Make sure that the camera is in null mode (see p. 14). Press
the MENU/ENTER button to open the Main Menu.
2 Press the UP or DOWN arrow to navigate to
the Analysis line. Then press the
MENU/ENTER button to open the Analysis
menu.
3 Use the UP and DOWN arrows to
navigate to the Remove All line.
•
Press the LEFT or RIGHT arrow
to cycle through Remove All,
Remove Spot, Remove Area,
Remove Profile and Remove Iso
.
4 Press the MENU/ENTER button to save the selection, or
the ESC button to return to the Analysis menu without
saving.
Using Analysis Tools