General Tools and Instruments MMD950 - Manual (Page 12)

If either calibration check produces a non-zero reading for 10 seconds, and the
meter is still under warranty, call General's Customer Service Department at
212-431-6100 to arrange to return the meter for service or replacement.
SPECIFICATIONS
Measurement Ranges 0 to 99.9% WME and 0 to 99 REL
Measurement Accuracy ±3% of reading + 5 digits in pin mode
Length of Test Pins 10mm (0.4 in.) on remote probe; 10mm and 15mm
(spares)
Length of Remote Probe Cable 46 in. (1.168m)
Measurement Depth (pinless mode) 4 in. (102mm)
LCD Range/Size 99.9 count with 0.9 in. (23mm) high digits
LCD Resolution 0.1%
Bar Graph Composition 40 LEDs of 3 colors: green (0 to17%), yellow
(17 to 30%) and red (>30%)
Bar Graph Resolution ±1 LED (±2.5%)
Auto Power Off After 3, 5 or 10 minutes (user selectable) with
0% reading
Low Battery Warning Level <6.5VDC
Current Consumption <70mADC
Operating Temperature 32° to 122°F (0° to 50°C) @<80% relative humidity
Dimensions 9 x 2.75 x 1.625 in. (229 x 70 x 41mm)
Weight 8 oz. (249g)
Power Source 9V battery (included)
12