King Kooker 2106 Heavy Duty Portable Propane Outdoor Smoker Package - Manual (Page 9)

9
2. Read assembly instructions, and understand sequence of assembly, before commencing to
assemble your smoker.
3. Turn the smoker cabinet upside down. Install the four appliance legs using three black bolts on each
leg to the bottom of the smoker cabinet. The two front legs will have holes for connection to the face
panel assembly. After all four legs are connected, install the face panel assembly onto the front
appliance legs using four black bolts. Reference Figure 2 for proper leg and face panel assembly
placement.
4. Locate the hose and regulator. Check that the 3/8” female flare swivel end of the hose is
tightened onto the brass adapter on the bottom of the valve. The hose to valve conection must be
tightened and leak tested (see Leak Test instructions on page 12). See below Figure 2.
Valve End
2 Screws
Front View of Face Panel
Back Side of Front Panel
with Valve Installed
(Hose/Regulator Not Pictured)
Valve Orifice
Figure 2 - Hose Connection Diagram
Face Panel
Assembly