Rpa-2 powder applicator - maintenance, High voltage contact repair – Ransburg RPA-2 Powder Applicator A12950-XXX User Manual

Page 28

Advertising
background image

RPA-2 POWDER APPLICATOR - Maintenance

25

LN-9271-12.2

High Voltage Contact Repair

High Voltage Contact Repair

Pull damaged spring and wire out from the front of applicator with pli-
ers. Insert new contact assembly from front of application until spring
rests in the bottom of the hole. From inside the cascade labyrinth, use
a 3/16” diameter flat-end plastic rod and bend over flat.

Advertising