Ransburg RPA-2 Powder Applicator A12950-XXX - Manual (Page 29)

RPA-2 POWDER APPLICATOR - Maintenance
LN-9271-12.2 26
SLOT
ASSEMBLY OF THE APPLI-
CATOR
Assemble the applicator in reverse order of
the disassembly.
Assembly Notes:
1. The lower powder tube and ring ass’y el-
bow, and upper powder tube must align
to create a seal. The best method is to
assemble all three parts loosely, then
tighten the thumb screws, and then tighten
the shaping air or shroud.
2. The power hose connection should always
be rotated in until the lower powder tube and
ring ass’y seals in the powder elbow.
Alignment Pin (White color)
Note: The lower powder tube has an alignment
slot (see above) which must align with the align-
ment pin in the gun body for proper fit of com-
ponents.