Rivers Edge RE602 JOURNEYMAN - Manual (Page 21)

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 21
Operator's Manual
Rivers Edge One-Man Ladder Stands
RE622 BACkPACkING STRAP
ATTAChMENT INSTRuCTIONS
1. Stack metal components of the ladder AS ShOWN IN
fIGuRE 1A AND 1B.
2. Lay stabilizer with extension tube along side of stacked ladder.
Wrap the provided ladder ratchet strap around the stacked frame.
Hook the two “S”-hooks together and ratchet tight. This will se-
curely hold all ladder components together.
3. Attach backpacking straps (48067) on packed ladder. Fold strap
in half. Feed folded strap through foot platform mesh and around
platform frame OR around the ladder rung located directly under-
neath the foot platform. Feed the two loose ends of strap through
folded loop and pull tight forming a cinch knot. SEE fIGuRES 2A
AND 2B. Feed the two loose ends of straps around bottom group
of ladder rungs and secure with provided tri-slide buckles.
SEE fIGuRE 2C.
4. Secure all ladder sections and stabilizer bar together with your ratchet strap.
Figure 1A: Stacked View
Figure 1B: Unstacked View
Figure 2A: Attaching the straps Figure 2B: Pulling the straps tight
Figure 2C: Attaching
straps to bottom