Rivers Edge RE602 JOURNEYMAN - Manual (Page 28)

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 28
Operator's Manual
Rivers Edge One-Man Ladder Stands
7. Sections are assembled on the ground in the following order: bottom section
(SL44 ladder); second section (SL43 ladder); third section (SL60 ladder); top
section (assembled top platform section). SEE fINIShED 15’ JOuRNEYMAN
EXTREME lADDER.
8. With all sections assembled together on ground, secure all sections together
using (6) provided spring lock pins. Handle of spring lock pin must be put
to the outside of ladder side rails. SEE fIGuRE 3.
9. Attach the stabilizer bar (L17) to the second ladder section mounting bracket
using (1) provided spring lock pin. Spring lock pin must be put in appropriate
hole to achieve desired distance from tree. Adjustment in length may be
needed when ladder is uprighted later in instructions. SEE fIGuRE 4.
10. a. Tie one end of the provided 9’ rope to the link welded onto the
stabilizer bar, just in front of the tree hugger. Be sure your double knot
is secure. SEE fIGuRE 5.
b. Tie one end of each of the provided 15’ ropes to the square tube side
rails, just in front of the welded on tree blades. Be sure your double
knots are secure. SEE fIGuRE 5.
Figure 4
Figure 3
spring lock pins
stabilizer bar
spring lock pin
seat cushion
18" camo sleeve
shooting rail
9" camo sleeves
armrest studs
Figure 5