Tree – Rivers Edge RE602 JOURNEYMAN User Manual

Page 46

Advertising
background image

Check for parts online at

www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5

Check for parts online at

www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5

46

Operator's Manual

Rivers Edge One-Man Ladder Stands

3. With two people securely holding the ladder, use the three point contact

climbing method to slowly climb the ladder and carefully keep a constant

hand grip on the ladder at all times. Always lean forward, toward tree, to

keep top section tree blades against the tree. Be certain ladder bottom

is firmly seated on dry, level ground. Attach your harness tether to

the tree before securing the platform to the tree and stepping onto

platform. Refer to the full Body harness instructions included with

this product.

4. Standing on ladder step, lean toward tree with ratchet strap now in hand,

hook "S" hook with long strap through hole provided on tree blade. Feed

the long strap through the center (slot) of ratcheting mechanism and back

around through tightening lever. SEE fIGuRES 2 and 3.

notE: be sure you feed the long strap correctly so there are no twists in

the strap.

Wrap entire ratchet assembly around tree and hook other "S" hook through

opposite tree blade hole. Pull tail of long strap until most of the slack is

taken out. Be sure entire strap is even and at the same level all around tree.

"Ratchet" tight to tree, this will securely attach ladder to tree and prevent

movement. SEE fIGuRES 2 and 4.

notE: to release ratchet, simply pull the release lever and open tightening

lever wide open (flat).

5. If applicable, attach backrest portion of seat to tree by wrapping the long

strap with buckle end around tree and snapping together with opposite

end. Adjust as needed.

6. If applicable, once seated the shooting rail can now be seated down over

studs of armrest mounts. SEE fINIShED lADDER IMAGES.

7. Reverse setup & use instructions to take ladder down.

Figure 2

pull tail to take out slack

tightening lever

release lever

feed through slot

TREE

ratchet

back and

forth

Figure 3

Figure 4

Advertising
This manual is related to the following products: