Robinair ACR2005 Air Conditioning and Refrigerant Service Solution - Manual (Page 17)

15
ACR2005 Refrigerant Service Solution
Operating Instructions
SNAPSHOT SUMMARY
Date
Time
AMBIENT DATA
Humidity
Temperature (F
°
or C
°
)
VEHICLE DATA
Main Vent Temperature (minimum)
Back Vent Temperature (minimum)
High Side Maximum Pressure (psi/kPa)
Low Side Minimum Pressure
Charged Weight (the last amount charged)
Recovered Weight (the last amount recovered)
IDENTIFIER RESULTS
R134a: This percentage refers to the amount of R-134a that is
present in proportion to any other refrigerants present.
Air: This percentage refers to the amount of air, by weight,
that is present in the system.
CODE:
For OEM Internal Use
NOTE :
• The last recovered and charged amounts will always appear, indicating the
most recent recovered and charged amounts. If a charge or recover has not
been performed since the unit was powered up, the display will read zero.
• All snapshot screens have been changed to include identical information.
The only identifying difference is the title at the top of the printout:
SNAPSHOT SUMMARY – initial snapshot started with the SNAPSHOT key.
RECOVERY SUMMARY – snapshot after a recovery. Only available if
recovery was started from an initial snapshot.
CHARGE SUMMARY – snapshot immediately after a charge.
5. When you have the necessary information, turn OFF the engine. Press the
RECOVERY key to go directly into Recovery, or you can exit to the
MAIN MENU using the MAIN MENU key.
If all data is satisfactory, and you will not be doing any service work,
allow the system to equalize in order to minimize refrigerant loss. Close
the service couplers on the high- and low-side hoses. Disconnect the hoses
from the vehicle access ports.
The unit
display gives
directions and
explanations
based on
current
vehicle/service
status. Read
and follow
these display
prompts at all
times!