Securitron M680BDCX - Manual (Page 15)

PN# 500-10560
Page 15 Rev. D, 07/12
4.
After installation and wiring have been completed, re-install the lock cover through the lock chassis
using the two (2) phillips screws removed in the first step.
5.
Adjusting the field of the infrared motion detector.
The infrared motion detector can be easily adjusted after installation to cover the desired approach
area. Rotate the black reflector as shown to adjust from a narrow to a wide coverage area.
MAGNALOCK MAINTENANCE
Visual Inspection
Check the rubber washers for elasticity and proper pivoting. Tighten as required.
Check for build-up of debris on the Magnalock and strike armature.
Check for rust on the Magnalock and strike plate armature. Clean as required.
Front View