Securitron DK-37 User Manual
Page 2
Advertising
![background image](/manuals/349195/2/background.png)
PN# 500-20750
Page 2
Rev. A, 11/13
Place the mounting plate on the mounting surface and secure in place with #8 mounting screws
as shown in Figure 2. Note: Ensure that the T-nut is in place through the hole between the
mounting surface and mounting plate.
Figure 2 – Installation of Mounting Hardware
Route cable through the hole and affix the DK-37 onto the mounting bracket. Once on the
mounting bracket, pull the DK-37 downwards in place as shown in Figure 3.
Figure 3 – Installation of DK-37
Install the 8-32 screw through the front of the DK-37. Apply the name plate label over the 8-32
screw as shown in Figure 4.
Figure 4 – Installation of securing screw
Advertising