Securitron DSB_Series User Manual

Page 2

Advertising
background image

Securitron Magnalock Corp. www.securitron.com

ASSA ABLOY, the global leader

Tel

800.624.5625

[email protected]

in door opening solutions

© Copyright, 2011, all rights reserved

PN# 500-22700

Page 1

Rev. F, 03/11

SECURITRON SERIES DSB DUAL SENSE BAR

INSTALLATION AND OPERATION INSTRUCTIONS

1. INTRODUCTION
The Securitron Dual Sense Bar (Model DSB) is an exit device intended for use on magnetically

locked, non-fire rated doors only. The bar will operate via mechanical movement (push) to
provide a primary egress function that does not require human touch in addition to function by

touch sense. The mechanical function has been included to simplify use and ease exit for

personnel with prosthetics or those who may otherwise have their hands occupied (e.g. carrying

boxes, manipulating carts, maneuvering wheelchairs, etc.). The assembly consists of an

aluminum bar available in lengths to fit standard U.S. door openings: (36", 42", and 48"). The

end mounts provide the mounting platform for the bar and house the electronic PC boards and

mechanical switching mechanisms within the bar.

2. SPECIFICATIONS

MECHANICAL ELECTRICAL

Physical Size:

Height: 3” [76mm]

Depth: 3” [76mm] (from mounting surface)

Overall Length:

36” Door = 34-3/16” [868mm]

42” Door = 40-3/16” [1021mm]

48” Door = 46-3/16” [1173mm]

Operating Force (Maximum): 15 Lbs. [66.7N]
Environmental (Recommended):

Temperature Range: 32ºF [0ºC] to

120ºF [49ºC]

Humidity: 10% to 90% RH

Voltage Input: 12 or 24 Volts DC
Current Draw (Base - At Rest): 24mA

(DPST) Contact Rating: 1 Amp @ both 12

and 24VDC

Illuminated Sign (Option): 20mA Maximum

(additional)

DSB Connection: 16-Foot [4.88 Meter] Wire
Cable with Traditional Connector
ELDSB Connection: Wiring Harness with

ElectroLynx Connector

3. PRODUCT OVERVIEW
Upon unpacking this product, an inventory should be made to ensure that all the required

components and hardware have been included. Along with these instructions, the DSB product

should include the following items:

Figure 1

4. HARDWARE (U.S. STANDARD)

Phillips Truss Head

Screw, 1-3/4” Long

Blind Nut

Plastic Flat

Washer

Blind Nut Collapsing

Tool

Hardware Pack

DSB

Traditional Power

Cable (w/ TSB-C)

OR

ElectroLynx Harness

4X

4X

1X

4X

Advertising