Securitron CEPT - Manual (Page 2)

PN# 500-22115
Page 2 Rev. C, 05/11
Components included with this Product:
Item Description Quantity
A CEPT Assembly 1
B Back Box 2
C Screws, 10-24 x 3/4” Phillips Flat Head Undercut (for metal) 13
D Screws, #10 x 3/4” Phillips Flat Head (for wood) 13
E Strain Relief Bushing 2
F Wire Nut (CEPT-10 Only) 4
G Dolphin™ Connector (CEPT-10 Only) 17
RECOMMENDED TOOLS
Basic for Factory Prepped Door Install: Additional for More Detailed Install:
 Hammer
 Flat Tip Screwdriver: 1/4”
 Phillips Screwdriver: #2
 Wire Strippers/Crimpers
 Pliers  Center Punch
 Drill Motor & Bits
 Reciprocating Saw & Blades
 Router & Bits
 Chisel
 Metal File
SPECIFICATIONS
Physical
For proper installation and operation of the CEPT, the thickness of the door should be 1-3/4”
minimum. The door opening limitations listed here apply to a (1-3/4”) door equipped with the
following hinge sizes and configurations.
Door Hinge Configuration: Door Opening Angle Range:
Up to 5” Butt Hinge 0-180°
5-1/2” Butt Hinge 0-130°
6” Butt Hinge 0-110°
A
B
C
D
G E F