Gilderfluke&Co Br-miniBrick4 User Manual

Br-minibrick4, Digital output show control system

Advertising
background image

Br-miniBrick4

Digital Output Show Control System

The Br-miniBrick4 is a complete, stand-alone Show Control System. It features

Four Digital (on/off) outputs and one trigger input. Once programmed, the Br-
miniBrick4
runs from onboard nonvolatile memory. No PC is needed. All you need to
add is a 9-24 VDC power supply, whatever you want to control, and (optionally), a
switch closure to tell it to start.

The Br-miniBrick4 is normally programmed using the buttons on its top. You also

have the option of programming a miniBrick4 using our PC•MACs Show Control soft-
ware. Once a program is ʻdrawnʼ using the PC•MACs software, data is sent to the Br-
miniBrick4
through a USB-RS232/422 serial port adapter and Br-miniBrick4/Cable.
The Br-miniBrick4 can then be disconnected from the PC and it will run all by itself.

Gilderfluke & Co. 205 South Flower Street Burbank, California 91502 818/840-9484 800/776-5972 fax 818/840-9485

Br-miniBrick4 v1.1+ Manual / 8/17/12

Advertising