Gilderfluke&Co Pb-DMX - Manual

Pb-DMX/32
Digital Relay Output Show Control System
The Pb-DMX/32 is a complete, stand-alone Show Control System that plugs right
onto eight, sixteen, twenty-four or thirty-two position Grayhill ʻG5ʼ relay mounting
boards. The combination of the Pb-DMX/32 controller and relays provides up to thirty
two high current (rated at 3.5 amps each), high voltage (AC to 120 vac or 240 vac, DC
to 60 vdc) outputs, and two trigger inputs. It can run from onboard nonvolatile memory,
RS-232 serial port, or industry-standard DMX-512 input. The Pb-DMX/32 is also capa-
ble of outputting a small number of DMX-512 channels which can be used to control
light dimmers, smoke machines, wiggle lights, additional Pb-DMX/32s, or any other
piece of DMX-512 compatible equipment.
The Pb-DMX/32 is typically programmed using our PC•MACs Show Control soft-
ware. Once a program is ʻdrawnʼ using the PC•MACs software, data is sent to the Pb-
DMX/32 through the RS-232 serial port. The Pb-DMX/32 can then be disconnected
from the PC and it will run all by itself.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Pb-DMX/32 v1.+ Manual / 10/31/13