Gilderfluke&Co Br-miniBrick8 - Manual

Br-miniBrick8
ServoMotor & Digital Output Show Control System
The Br-miniBrick8 is a complete, stand-alone Show Control System. It features
Eight Digital (on/off) outputs, two model airplane-style ServoMotor outputs, and two
trigger inputs. It can run from onboard nonvolatile memory, RS-232 serial port, or
industry-standard DMX-512 input. All you need to add is a 9-24 VDC power supply and
whatever you want to control.
The Br-miniBrick8 is programmed using the buttons on its top or our PC•MACs
Show Control software. Once a program is ʻdrawnʼ using the PC•MACs software, data
is sent to the Br-miniBrick8 through the PCʼs standard RS-232 serial port. The Br-
miniBrick8 can then be disconnected from the PC, and it will run all by itself.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-miniBrick8 v3.+ Manual / 8/17/12