Hochiki TE-TLE - Manual (Page 21)

Hochiki TE-TLE True Loop Emulator – User Manual 21
Hochiki Europe (UK) Ltd 2-3-0-416/Mar04/Iss3
The Control Panel would normally set the Zero Point and Variable Threshold. The user can
change the current Analogue Value and the Fire Point.
Refresh Button
If the Control Panel (or a Script or Ramping - see later sections in this Manual) changes a
device’s properties, those properties are not automatically updated in this dialogue box.
Instead, the Refresh button at the bottom of the screen is enabled:
Clicking on this updates all the properties on the dialogue box to match those of the current
device.
Auto-Refresh Button
This button is a toggle button that stays down or up when clicked. When it is down, the
dialogue box automatically updates all the device properties whenever a Control Panel, a
Script or Ramping changes the properties of the devices.
Click on the Output tab to show the Output properties for this device:
This particular device type has only one output channel. This channel controls the LED's
and is not currently activated by the control panel. The picture to the right shows how the
device will look on the screen if the LED's are activated.
Some device types have monitored outputs and can have their outputs activated
continuously or intermittently. Below is the property page for such a device: