IAI America RCB-101-MW - Manual (Page 18)

13
The operating methods of buttons and input controls available in this window are explained below.
(1) Toolbar
buttons
Fig. 5.2 Toolbar in Position Data Edit Window
[1] Save to file
Save data to a file.
[2] Send to controller
Send (write) data to the controller.
[3] Reload position data
Reload position data from the controller and then refresh the displayed data.
If the position data has been changed in the edit window (when “Modified” is shown in the status bar),
clicking this button will display the warning message shown in Fig. 5.3.
* Take note that if you select Yes in this window, data that have been edited but not yet been written to
the controller will be lost.
Fig. 5.3 Warning Message
[4] Print
Output position data to the printer.
[5] Cut
Cut the range of data selected in the position data input area and save it to the clipboard.
* You can select data in units of rows.
[6] Copy
Copy to the clipboard the range of data selected in the position data input area.
* You can select data in units of rows.
[7] Paste
Paste the data in the clipboard to the selected position.