IAI America RCB-101-MW - Manual (Page 19)

14
[8] Switch display
Change the display mode of the position data input area from normal to detail (or vice versa). (Fig. 5.14,
Fig. 5.15)
[9] Show monitor window
Display the status monitor window of the axis you are currently editing.
This window is the same as the one you can open by selecting Status from Monitor in the main menu
of the main window.
[10] Divide position data equally
Clicking this button will display the window shown in Fig. 5.4.
Set appropriate values in Start Position No. and End Position No., select an appropriate option under
Fraction processing, and then click OK. The distance between the specified two positions will be
divided equally. (This function is called “Equal division function”)
* Clicking this button while multiple rows are selected in the position data input area will cause the
software to automatically populate the Start Position No. and End Position No. field.
Start Position No.: First position in the selected range
End Position No.: Last position in the selected range
Fig. 5.4 Divide Position Data at Equal Intervals Window
If data has been input between the specified two positions, the warning message in Fig. 5.5 will be displayed.
Fig. 5.5 Warning Message