IAI America RCB-101-MW - Manual (Page 3)

Supported Models
The PC software RCB-101-MW supports the following controller models of the specified versions and later.
Table 1 List of Supported Models
Model name
Supported versions (For each model, all controllers of the
specified version and later are supported.)
RCP V1.0.0.0
RCS V3.0.0.0
E-Con V3.0.5.0
RCP2 V4.0.0.0
ERC V4.0.0.0
* Please check the controller model and the version of this application. If the controller is not supported by
the software, the actuator may behave erratically.
The software reset function and velocity/current monitor function are effective on the controllers of version
4.0.0.0 or later.