IAI America XSEL-S - Manual (Page 16)

2. EtherNet/IP
Specifications
10
2. EtherNet/IP Specifications
Item Description
Device Type Generic Device
IP Address
1.0.0.1 to 255.255.255.254 (Note 2)
(Software setting with I/O parameters)
Port No.
2222 (UDP) (Note 1)
44818 (TCP/UDP) (Note 1)
Baud Rate
10/100Mbps
(Software setting with I/O parameters)
Communication Mode
10BASE-T/100BASE-TX (Full-duplex/Half-duplex)
(Software setting with I/O parameters)
Cable Category 5 or more
Connector RJ45
Note 1 This is the port for the use of EtherNet/IP remote I/O communication.
Note 2 0 and 127 in 1 st octet and 0 and 255 in 4 th octet cannot be used since they are reserved
addresses.