Installation environment – IAI America PS-24 User Manual
Page 19
15
6.
Installation Environment
Do not use this product in the following environment.
Location where the surrounding air temperature exceeds the range of 0 to 50°C
Location where condensation occurs due to abrupt temperature changes
Relative humidity less than 30%RH or greater than 85%RH
Location exposed to corrosive gases or combustible gases
Location exposed to significant amount of dust, salt or iron powder
Location subject to direct vibration or impact
Location exposed to direct sunlight
Location where the product may come in contact with water, oil or chemical droplets
When using the product in any of the locations specified below, provide a sufficient shield.
Location subject to electrostatic noise
Location where high electrical or magnetic field is present
Location with the mains or power lines passing nearby