IAI America REXT - Manual (Page 320)


Part 2 Startup Chapter
Chapter 5 Network Setup
294
Part 2 Startup Chapter
(6) Restarting the Gateway R unit
The Gateway R unit must be restarted to make the transferred parameters effective.
[1] When the parameter transfer is completed, a message box appears and prompts you to restart the unit, as
shown below. Click Yes (Y).
[2] After the unit has been restarted, a message box appears again, prompting you to load the parameters. Click
Yes (Y).
[3] When the parameter load is completed, click the OK button. Confirm that the displayed parameters are correct.
-320-