JuiceGoose NXRT Series - Manual (Page 25)

NXRT‐1000, NXRT‐1500, NXRT‐2000, NXRT‐3000 USER’S MANUALUNINTERRUPTIBLE POWER SUPPLY (UPS)
• Once turned on, the UPS will perform a self‐test function, when the yellow LED turns to green,
LCD displays “On Batt” – the UPS is now functioning in DC mode.
Turning Off the UPS when in DC Mode
• Press and hold the ON/OFF button for more than 3 seconds to turn off the UPS. This means the
internal inverter has been deactivated.
• During the shutdown period, the UPS will run a self test. Once the self‐test has been completed,
assuming there is still no AC input, the LCD will no longer display information. This indicates the
UPS has no output.
Self Test Operation
Please refer to the three operating buttons on the front panel of the UPS.
• Confirm the UPS is in “Utility Mode”.
• Press and hold the “Function” button for a minimum of two seconds.
• The self‐test will last for 10 seconds, during this time the LED’s will be lit in a sequential,
repeating fashion.
Audible Alarm silence in DC Mode or Fault Mode
• When the UPS is in DC Mode, the audible alarm will sound every four (4) seconds. Press and
hold the “Function” Button for a minimum of two (2) seconds to disable the audible alarm.
• When the UPS is in Fault Mode, the audible alarm will continuously sound. Press and hold the
“Function” Button for a minimum of two (2) seconds to disable the audible alarm.
[25]