LevelOne FCS-4300 - Manual (Page 15)

Software Installation
In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant user
access to the camera.
At the end of the hardware installation, the Administrator must place the product software CD
into the CD-ROM drive of the PC running in MS Windows. An auto-run program will pop up (If
the program is not on auto-run, go to the root directory of the software CD and click on
“autorun.exe”).
Install “IP CamLocator”
Click on “Install Software” item, after the window contains changed, click on “IP
CamLocator
” to run installation program.