LevelOne FCS-4300 - Manual (Page 68)

Patrol
There are four patrol tours to set for composing different preset positions. Each one lists up
to 8 positions which can be programmed, and the camera moves to the programmed
positions sequentially. The camera stops when it moves to the last preset position.
General
Tour name：
Rename the tour name.
Tour position
Order：
There are 8 orders to select for camera directions.
Select Pos.：
There are up to 32 preset positions to choose for each order.
Recall：
When you click Recall, the camera moves to position of the selected preset number.
Clear： When setting specific preset number position to tour, click Clear to clear this direction
information.
Clear All：
Be careful! When you click Clear All, it will clear this tour all information out.
Set：
Use it to save the camera position to a preset number.
Set as default tour： Click it on to set this tour as default.
Tour Start：
To click Tour Start, and the camera moves on patrol tour.
Tour Stop：
While the camera moves on patrol tour, click Tour Stop to stop the patrol tour.
Carry out the following steps：
1. Click “Order” to choose one of eight orders.
2. Click Select Pos. to set the preset position.