LevelOne FCS-4300 User Manual
Page 34
Advertising
User
The Network Camera default account and password setting is “root/MAC address of IP camera (in
capital letters)”. IP CamLocator provides to assign a password if the Network Camera is intended to be
accessed by others. Use this menu to set the username and password of Administrator and up to 9
different users (User 1 to User 9), and the authentication access right of each group.
Username：
Set a user name between 5 and 16 characters.
Password：
Set a password between 5 and 16 characters.
Confirm：
Re-type the password to confirm.
Mode：
Set a user to Admin, Operator or Viewer mode.
Viewer authentication：
Allows any viewer direct access to Live View.
Advertising