LevelOne GES-2451 - Manual (Page 111)

105
10.3.2 Event Config
On this page, you can configure the RMON events.
Choose the menu SNMP →RMON→Event Config to load the following page.
Figure 10-10 Event Config
The following entries are displayed on this screen:
 Event Table
Select: Select the desired entry for configuration.
Index: Displays the index number of the entry.
User: Enter the name of the User or the community to which the
event belongs.
Description: Give a description to the event for identification.
Type: Select the event type, which determines the act way of the
network device in response to an event.

None: No processing.

Log: Logging the event.

Notify: Sending trap messages to the management station.

Log&Notify: Logging the event and sending trap messages
to the management station.
Owner: Enter the name of the device or user that defined the entry.
Status: Select Enable/Disable the corresponding event entry.
10.3.3 Alarm Config
On this page, you can configure Statistic Group and Alarm Group for RMON.
Choose the menu SNMP →RMON→Alarm Config to load the following page.