LevelOne GES-2451 - Manual (Page 9)

3
Chapter Introduction
Chapter 4 System This module is used to configure system properties of the switch.
Here mainly introduces:
 System Info: Configure the description, system time and network
parameters of the switch.
 User Management: Configure the user name and password for
users to log on to the Web management page with a certain
access level.
 System Tools: Manage the configuration file of the switch.
 Access Security: Provide different security measures for the
login to enhance the configuration management security.
Chapter 5 Switching This module is used to configure basic functions of the switch. Here
mainly introduces:
 Port: Configure the basic features for the port.
 LAG: Configure Link Aggregation Group. LAG is to combine a
number of ports together to make a single high-bandwidth data
path.
 Traffic Monitor: Monitor the traffic of each port
 MAC Address: Configure the address table of the switch.
Chapter 6 VLAN This module is used to configure VLANs to control broadcast in
LANs. Here mainly introduces:
 802.1Q VLAN: Configure port-based VLAN.
Chapter 7 Spanning Tree This module is used to configure spanning tree function of the
switch. Here mainly introduces:
 STP Config: Configure and view the global settings of spanning
tree function.
 Port Config: Configure CIST parameters of ports.
 MSTP Instance: Configure MSTP instances.
 STP Security: Configure protection function to prevent devices
from any malicious attack against STP features.
Chapter 8 Multicast This module is used to configure multicast function of the switch.
Here mainly introduces:
 IGMP Snooping: Configure global parameters of IGMP Snooping
function, port properties, VLAN and multicast VLAN.
 Multicast IP: Configure multicast IP table.
 Multicast Filter: Configure multicast filter feature to restrict users
ordering multicast programs.
 Packet Statistics: View the multicast data traffic on each port of
the switch, which facilitates you to monitor the IGMP messages
in the network.
Chapter 9 QoS This module is used to configure QoS function to provide different
quality of service for various network applications and
requirements. Here mainly introduces:
 DiffServ: Configure priorities, port priority, 802.1P priority and
DSCP priority.
 Bandwidth Control: Configure rate limit feature to control the
traffic rate on each port; configure storm control feature to filter
broadcast, multicast and UL frame in the network.