LevelOne WHG-1000 User Manual
Page 44
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
44
Service Domain : Select the desired Service Domain from the drop-down list.
Security Type : Select the desired security type from the drop-down list; the options are WEP, WPA-PSK,
WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP 802.1X.
Disable : Data are unencrypted during transmission when this option is selected.
WEP : WEP, Wired Equivalent Privacy, is a data encryption mechanism based on a 64-bit, 128-bit or 152-
bit shared key. Select WEP as the security type from the drop down list as desired.
Key Length : Select the desire option are 64 bits, 128 bits or 152 bits from drop-down list.
WEP auth Method : Enable the desire option among Open system or Shared.
Key Index : Select key index used to designate the WEP key during data transmission. 4 different
WEP keys can be configured at the same time, but only one is used. Effective key is set with a choice
of WEP Key 1, 2, 3, or 4.
WEP Key : Enter HEX format WEP key value; the system support up to 4 sets of WEP keys.
WPA-PSK (or WPA2-PSK) : WPA (or WPA2) Algorithms, allows the system accessing the network by
using the WPA-PSK (WPA2-PSK) protected access.