LevelOne WHG-1000 - Manual (Page 59)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
59
4.4.6 Network Utility
The administrator can diagnose network connectivity via the PING utility.
Please click on Utilities
→ Network Utility and follow the below setting.
 Ping : This utility will help ping other devices on the network to verify connectivity. Ping utility, using ICMP
packets, detects connectivity and latency between two network nodes. As result of that, packet loss and latency
time are available in the Result field while running the PING test.
 Destination IP/Domain : Enter desired domain name, i.e. www.google.com , or IP address of the
destination, and click Start button to proceed. The ping result will be shown in the Result field.
 Times : By default, it’s 5 and the range is from 1 to 60. It indicates number of connectivity test.
 Traceroute : Allows tracing the hops from the WHG-1000 device to a selected outgoing IP address. It should
be used for the finding the route taken by ICMP packets across the network to the destination host. The test is
started using the Start button, click Stop button to stopped test
 Destination Host : Specifies the Destination Host for the finding the route taken by ICMP packets across
the network.
 MAX Hop : Specifies the maximum number of hops( max time-to-live value) traceroute will probe.