AT&T CL83201 - Manual (Page 23)

Handset settings
Rename handset
You can create a handset name for each system handset.
1. When the handset is idle, press MENU/
�ELECT.
2. Use q
CID
or p
DIR
to scroll to >�ettings, then press
MENU
/�ELECT.
3. Use q CID
or p DIR
to scroll to >Rename handset, then
press
MENU
/�ELECT.
4. Change the handset name when prompted.
Press q
CID
or p
DIR
to move the cursor to the left
or right.
Use the dialing keys to enter a name (up to 11 characters). Each time
you press a key, a character on that key appears. Additional key presses
produce other characters on that key. See the chart on page 53.
Press
MUTE
/DELETE to backspace and delete a character.
Press and hold
MUTE
/DELETE to delete all characters.
5. Press
MENU
/�ELECT to save the setting and return to the previous menu.
There is a confirmation tone.
�ey tone
The handset is set to beep with each key press. You can adjust the key tone
volume or turn it off. If you turn off the key tone, there are no beeps when
you press keys.
1. Press MENU/
�ELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >�ettings, then press
MENU
/�ELECT.
3. Use q
CID
or p
DIR
to scroll to >�ey tone, then press
MENU
/�ELECT.
4. Use q
CID
or p
DIR
to select the desired volume or Off.
5. Press
MENU
/�ELECT to save your preference. There is a
confirmation tone and the screen returns to the
previous menu.
•
•
•
•
Rename handset
> Key tone
p
q
KEY TONE
p
q
Clr voicemail
> Rename handset
p
q
RENAME HANDSET
HANDSET____
17
Telephone settings