AT&T CL83201 - Manual (Page 88)

Answering system
82
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause or delete the message.
When messages are playing on the telephone base:
Press q /VOLUME/p to adjust the message playback volume.
Press /��I� to skip to the next message.
Press /RE�EAT to repeat the message. Press twice to hear the
previous message.
Press
X/DELETE to delete the message.
Press /
�LAY
/�TO� to stop the playback.
Press /��EA�ER ��EA�ER to stop playback. The screen shows Call back?, then
press
MENU
/�ELECT, or /��EA�ER ��EA�ER to call back the caller if the caller’s
number is available. If the dialing format used is not correct, then use the
option below to choose the correct dialing format before calling back
the caller.
Press
MENU
/�ELECT to pause playback and show the caller ID information
if available. From here, you can press
OFF
/CANCEL to resume playback,
press # (pound key) to show different dialing options (page 65), or press
/��EA�ER ��EA�ER to call back the caller. If you do not call back within 10
seconds, message playback resumes automatically.
When messages are playing on the handset:
Press q
CID
/VOLUME or p
DIR
/ VOLUME to adjust the message
playback volume.
Press
EQ to adjust the message playback audio quality.
Press 6 to skip to the next message.
Press 4 to repeat the message. Press twice to hear the previous message.
Press
MUTE
/DELETE to delete the message.
Press 5 or
OFF
/CANCEL to stop the playback.
Press /��EA�ER ��EA�ER to switch between speakerphone mode and
handset mode.
Press
�HONE/
FLA�H
to stop playback. The screen shows Call back?,
then press
MENU
/�ELECT, �HONE/
FLA�H,
or /��EA�ER ��EA�ER to call back
the caller if the caller’s number is available. If the dialing format used
is not correct, then use the option below to choose the correct dialing
format before calling back the caller.
Press
MENU
/�ELECT to pause playback and show the caller ID information
if available. From here, you can press
OFF
/CANCEL to resume playback,
press # (pound key) to show different dialing options (page 65), or press
�HONE/
FLA�H
to call back the caller. If you do not call back within 10
seconds, message playback resumes automatically.
NOTE: The equalizer stays on the same settings until you change it by pressing EQ .
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•