Superwinch H14P – 6,350 kgs Manual Clutch (Long Drum) - Manual (Page 5)

GENERAL SPECIFICATION DATA
02-1 GENERAL SPECIFICATION DATA
WINCH
Type ................................................ H10/12/14P
Gear Reduction ............................... Planetary
Gear ratio ........................................ 21 : 1
Drum ............................................... Fabricated steel running in copolymer maintenance free bearings
Braking ............................................ Integral, fail safe, bi-directional, full load holding, hydraulically released, spring
applied. Where fitted, a load control valve provides dynamic braking.
Freespool ........................................ Operated either by an ergonomically designed handle and trigger mechanism,
locking in both engaged and disengaged positions, or, by integral pneumatic
device.
Mounting ......................................... Designed to meet most industry standard dimensions, this winch can be foot or low
mounted at any angular orientation. Under or Overwound.
STANDARD DRUM MODELS
Model Designation ......................... H10P H12P H14P H14P
Part No ........................................... 5310 5320 5330 653001
......... 5312 5322 5332
....
Weight (Less rope) ........................ 70 kg 70 kg 70 kg 77 kg
Recommended Rope ø .................. 11 mm 12 mm 13 mm 11 mm
Drum capacity ................................ 49.7
M
47.1
M
36.5
M
40.0
M
Drum ø ........................................... 101.6 mm 101.6 mm 114.3 mm 180 mm
Line Speed (1st Layer, No Load) .... 13
M
/min 9.5
M
/min 9.0
M
/min 10.5
M
/min
Line Pull (Bottom Layer) ................. 44.5 kN 53.4 kN 62.3 kN 12.5 kN
Operating Pressure ........................ 150 bar 150 bar 150 bar 90 bar
Oil flow ............................................ 57 l / min 57 l / min 57 l / min 30 l / min
LONG DRUM MODELS
Model Designation ......................... H10P H12P H14P
Part No ........................................... 5311 5321 5331
......... 5313 5323 5333
....
Weight (Less rope) ........................ 70 kg 70 kg 70 kg
Recommended Rope ø .................. 11 mm 12 mm 13 mm
Drum capacity ................................ 56.6
M
53.5
M
41.5
M
Drum ø ........................................... 101.6 mm 101.6 mm 114.3 mm
Line Speed (1st Layer, No Load) .... 13
M
/min 9.5
M
/min 9.0
M
/min
Line Pull (Bottom Layer) ................. 44.5 kN 53.4 kN 62.3 kN
Operating Pressure ........................ 150 bar 150 bar 150 bar
Oil flow ............................................ 57 l / min 57 l / min 57 l / min
FREESPOOL
Type Part No.
Manual 5310, 5311, 5320, 5321, 5330, 5331
Pneumatic 5312, 5313, 5322, 5323, 5332, 5333
Manual & Load Control 5310S, 5311S, 5320S, 5321S, 5330S, 5331S
Pneumatic & Load Control 5312S, 5313S, 5322S, 5323S, 5332S, 5333S
Freespool deactivated 653001
& Load Control
02