Teledyne LeCroy WaveMaster 8000A - Manual (Page 11)

Getting Started Manual
WM-GS-E Rev E
9
AC Power Source
Note:
The X-Stream DSO automatically adapts itself
to the AC line input within the following ranges:
Voltage Range: 90 to 132
VAC 180 to 264
VAC
Frequency Range: 45 to 440 Hz 45 to 66 Hz
100 to 240 Vrms (+/-10%) AC at 50/60 Hz; 115
Vrms (+/-10%) AC at 400 Hz; Automatic AC
voltage selection; Installation Category: 300V
CAT II
No manual voltage selection is required; the
instrument automatically adapts to line voltage.
WaveMaster 8620A,
8420A
SDA 18000, 11000, 9000,
6020, 4020
≤ 800 watts (800 VA)
depending on accessories
installed (internal printer,
probes, PC port plug-ins,
etc.)
WaveMaster 8600A,
8500A, 8400A
WavePro 7000A Series
SDA 6000A, 5000A,
4000A, 3010
DDA-5005A, 3000A
≤ 650 watts (650 VA)
depending on accessories
installed (internal printer,
probes, PC port plug-ins,
etc.)
The power supply of the DSO is protected
against short circuit and overload by a
5x20 mm fuse (T10.0 A/250 V).