Teledyne LeCroy WaveMaster 8000A - Manual (Page 37)

Getting Started Manual
WM-GS-E Rev E
35
To Turn On a Channel Trace
1. On the front panel, press a channel select button, such as , to display the trace
label for that input channel.
2. To turn on a math function trace, touch Math in the toolbar, then Math Setup... in the
drop-down menu. Touch the On checkbox for the trace you want to activate.
3. You can also turn on traces for math functions, parameters, and memory traces without
leaving the Vertical Adjust dialog by touching the icons at the bottom of the Vertical Adjust
dialog:
, , , .
Whenever you turn on a channel, math, or memory trace via the toolbar, the dialog at the bottom
of the screen automatically switches to the vertical setup or math setup dialog for that selection.
You can configure your traces from here, including math setups.
The channel number appears in the Vertical Adjust tab of the "Vertical
Adjust" dialog, signifying that all controls and data entry fields are dedicated to the selected trace.